Temporary chip seal markers

Chip seal markers are typically installed prior to spraying while the centerline stripes are still visible.  This avoids having to re-measure lanes. 

The road surface should be reasonably clean for good adhesion.  The bottom of the marker has a self stick pad already on the bottom, so it's just peel and stick.  Some pressure should be applied while sticking the marker to the road to ensure good adhesion.

The markers have a clear plastic cover attached with a single staple.  With the markers in place, just spray right over them.  When the seal coat has had enough time to dry, the formerly clear plastic cover is removed, exposing a clean marker. 

 

 

Polyurethane Temporary Chip Seal Marker Two way



Model: KT-932 2-Y (shown)
Two way reflection
Size: 4 X 2 inches
Color : Yellow or White (KT-932 2-W)


These temporary markers have a great bending memory. The retro reflective tape is protected from oil and dirt by a clear plastic cover attached with only one staple for
easy removal. Excellent for chip seal, slurry seal, or temporary delineation.
It also has a self adhesive bottom.

Polyurethane Temporary Chip Seal Marker One way



Model: KT-932 1-W (shown)
One way reflection
Size: 4 X 2 inches
Colors :  White or Yellow (KT-932 1-Y)


These temporary markers have a great bending memory. The retro reflective tape is protected from oil and dirt by a clear plastic cover attached with only one staple for easy removal. Excellent for chip seal, slurry seal, or temporary delineation.
It also has a self adhesive bottom.
 
 
Copyright © 2010 K-Lite USA, LLC



Webmaster@k-liteusa.com